FTA Pirates - Free FTA Files | FTA Files | Bin Files | FTA Keys | FTA Bin - All Forums

NFUSION IS GONE README

Mon, 15 Feb 2010 08:59:38 +0000

NFUSION IS GONE FOREVER AS TO ITS PREVIOUS OWNER HAS BEEN SUED AND LOST IN FEDERAL COURT, THE FINE IS $20,000,000.00 TWENTY MILLON DOLLARS, REMEMBER IF YOU GET A SUDDEN URGE FOR BEING CARELESS LIKE STUPIDITY TWARDS THINKING THAT DIKNET WONT SCREW YOU, YOU BETTER THINK THREE TIMES, THEY ARE VERY SERIOUS ABOUT THEFT AND WILL GET YOU !!!!!!!!!!!!

NOTE; THIS AS ALL OTHER POSTINGS AND FILES ARE ONLY PROVIDED FOR INFORMATIONAL PURPOSES ONLY !

READ THIS NOW !

Mon, 15 Feb 2010 08:45:01 +0000

NOTE, ALL INFORMATION AND FILES LOCATED AT THIS WEBSITE IS PURELY FOR INFORMATIONAL PURPOSES ONLY !

Final Judgment And Permanent Injunction (January 28, 2010)

Mon, 15 Feb 2010 08:15:44 +0000

This is why Nfusion Quit Working & there has been no support offered THEY GOT SUED FOR PIRACY !

Final Judgment And Permanent Injunction (January 28, 2010) ----

D*sh Network, L.L.C. et al v. Dobos et al
(January 28, 2010)

AGREED FINAL JUDGMENT AND PERMANENT INJUNCTION
Document "Filed & Entered" into the Court Docket on January 28, 2010.
Refer to the attachment.

D*sh Network v. Dobos Case 'Highlights':

Case 0:09-cv-03448-JNE-SRN Document 8 Filed 01/28/10 Page 3 of 6

7. Defendant violated federal laws by offering to the public, providing, or otherwise engaging in the traffic of devices, components, and/or technologies that are primarily designed to circumvent and/or defeat Plaintiffs’ Security System and ultimately facilitate the unauthorized reception of Plaintiffs’ encrypted satellite signals and copyrighted D*SH Network Programming.

Such devices, components and/or technologies include: firmware and software designed or used for piracy in connection with FTA receivers, Internet Key Sharing, Control Word Sharing, distribution of data or code for use in piracy, and nFusion-branded FTA receivers.

Defendant acknowledges and admits that each of the foregoing was primarily designed, marketed and used to facilitate piracy of satellite television programming.

Case 0:09-cv-03448-JNE-SRN Document 8 Filed 01/28/10 Page 4 of 6

(ii) has only a limited commercially significant purpose or use other than to circumvent Plaintiffs’ Security System, including the encryption and access control protection contained in the software on D*SH Network Access Cards, or any other technological measure adopted by Plaintiffs that effectively controls access to copyrighted television programming on the D*SH Network platform;

BELOW IS A .PDF COPY OF THE COURT ORDER AND THE $$$$ FINE

NOTE! EVERYTHING OFFERED AT THIS WEBSITE IS ONLY FOR INFORMATIONAL PURPOSES ONLY !

SOON

Fri, 05 Feb 2010 08:12:08 +0000

Yep, Hardy Har them thar Smartypants Have a New Dongle Thingy Soon it will be Here And Up So get to the Gang planks and throw out those NON BELIVIN BACK STABBERS

New ECM Info

Fri, 05 Feb 2010 08:06:20 +0000

There was a ECM in the last 24 hours, some units got up right away but some are not yet ! be patient they should be up ASAP My Advise Me Bucko Is Have Some RUM

NFusion New Details Here !

Fri, 05 Feb 2010 07:51:11 +0000

Hello There Members and Friends Hardy Har Har Me Buckos

I am a member at this website http://www.goodfta.com/ there site is a great place, they have Details on new NFusion stuff, go and join them for the details as i have . . .

To join the good fta site is like $10.00 a month they bill you every three months !

Ya better go there and join or ill make yas walk the gangplank

And Don't forget to tell them Captain Hook Sent Yas From FTA PIRATES

Allot Of Recievers are Up

Wed, 03 Feb 2010 13:08:31 +0000

Most IKS/ICS are working right Now

Viewsats New V-Link internet adapter

Wed, 03 Feb 2010 13:04:11 +0000

Go to the Viewsat Area and Read !

New the V-Link internet adapter

Wed, 03 Feb 2010 12:59:31 +0000

The V-Link internet adapter, also known as V-Link Dongle,

Is a serial to ethernet converter wich adds a variety of interactive features to your Viewsat Receiver. This adapter is compatible with all Viewsat receiver models, all of this is possible because of the (Software / Firmware) of the V-Link Coding Team.
V-Link Unit price $59.99

Shipping Locations : United-States / Canada
The V-Link package includes :

- V-Link Unit
- Serial cable (M/F)
- AC Power Adapter

r-link

Wed, 20 Jan 2010 02:12:40 +0000

where can a person purchase the r-link for coolsat and is it still working?

Current Statis

Wed, 20 Jan 2010 01:23:30 +0000

Current Statis is its on off on off Just like the Sonicview Recievers, They Will Be Releasing brand new updated files the next few days , i Will Post them As They Are Posted and the diknet file as well !

NFusion is up and working with the EKS pay system

Wed, 20 Jan 2010 01:11:52 +0000

NFusion is up and working with the EKS pay system

Do a google search for NeoFusion <---- i looked and BEV is up, its cost for lifetime is $100.00 as its stated when you find the service, ( All The Files Are Below with detailed instructions,) do it as its the only alternative, and bev is a fav anyways, it is up and working great as Nfusion Is Gone Due to Litigation, the private server service works Great! with all the recievers NOVA too, HD is no For Now here are the files

NOTE THIS IS ONLY PROVIDED FOR INFORMATIONAL PURPOSES ONLY !

Nfusion up with eks sytstem

Mon, 18 Jan 2010 07:53:27 +0000

NFusion is up and working with the EKS pay system

Do a google search for NeoFusion <---- I hope That name dosen't get anybody angry at me i looked and BEV is up, its cost for lifetime is $100.00 as its stated when you find the service, ( All The Files Are Below with detailed instructions,) im gonna do it as its my only alternative, and bev is my fav anyways i will post in a week or so and give input as of the private server service ! it works with all the recievers NOVA too, HD no For Now here is the file

Go To The Nfusion Files Section For Files

IP Config Detection Tool A Must Have !

Sun, 17 Jan 2010 17:55:58 +0000

IP Config Detection Tool, Awsome Program Works Great, Read The Enclosed Note Before Using It, VERY IMPORTANT READ ME

WIZ TOOL Ihub Loader File WIZ1x0_105SR

Sun, 17 Jan 2010 17:45:56 +0000

WIZ TOOL Ihub Loader File WIZ1x0_105SR

Ihub_V1_9 Working File !

Sun, 17 Jan 2010 17:36:09 +0000

This File Works Good USA ONLY

SonicView Premier File 0263

Sun, 17 Jan 2010 17:26:15 +0000

Premiere_0263 12-15-09

Has A little Freezing But it Works

IHub How to Setup !

Sun, 17 Jan 2010 16:48:42 +0000

iHub How to Get rid of v82, and flash 1.4 successfully,works 100% C&P

What exactly will these steps do for me if everything works out?

1. You will be able to get the new v1.4 update on to your virgin iHub.
2. You will be able to get the new v1.4 update on to your v82.0 (bricked) iHub.
3. This will fix IP Config menu from not showing up after loading previous working files.
4. You will be able to get TV back, once the iHub settings are corrected and updated, the receiver will take care of itself.

So, have you been up for endless hours/days trying to figure out why your iHub is bricked and trying to get it back to life? Or even simply just trying to get your receiver to show up IP Config in the menu? Does your iHub fail to load the current v1.4 update? Then keep reading.....

I could not seem to find a NO-BS fix, all the "fix it this way guides" were way to vague for me and didn't cover the bases I needed covered, after asking for help and getting nothing, I decided to test a little myself. The results will have you up and running with v1.4 and a debricked iHub in no time at all if you are lucky.

This is basically the exact steps I took to get the iHub back to life and upload 1.4 from the dreaded v82.0, this is also going to fix the receiver not detecting the iHub as well. - Follow the below steps EXACTLY as I have typed them, if you RUN in to a problem at all during any of the steps, please post the problem. Keep in mind the files that I have included are for SonicView 360 Elite ONLY, you will have to download the premier/8000 files yourself if thats the STB in question.

Preliminary Check:

This will work as long as you have a router, and as long as you have a working iHub (one that lights up on back), and as long as when you plug the iHub in and press Search, and at least some sort of iHub info shows up, if it does, then this is what you will need to do.

Exactly as I have done it below, I was able to bring two iHub/IP Config menu back to life fairly easily. This is all based on me using a linksys router with default gateway of 192.168.1.1 - majority of routers have the same gateway ip.

But just something to check before you get started with the steps. Make sure you are ******ly plugged in to the first port on your router (with your computer in 1st port) and modem connection or dsl in the one furthest to left. Go to Start>Run>CMD>ipconfig

Make sure your Local IP is 192.168.1.100 and default gateway of 192.168.1.1, if not then I am not sure these steps would apply to you as well.

Make sure you have done:
Factory Default file from USB to receiver
Sys Clean file from USB to receiver
Hard reboot (back switch)
Load 206 Bin (for elite receivers only)
Hard reboot (back switch)

Steps to take:

1. Connect iHub to receiver

2. Leave Power on, on the receiver, but turn power off from the front panel (so that the time is displayed)

3. Connect ethernet cord to iHub, then ******ly in to ethernet port on computer, this part is where it is tricky and you might have to wait until you see "limited or no connectivity"

4. Open up the WIZ program, click search until it displays the fields with some sort of info. Once it does, your in luck! No BS!!!! Now you need to skip around a little for this next step.

4 1/2. Make sure Static is checked, you should now see the fields able to change settings. Make your settings exact to mine.

Local IP: 192.168.1.101 Port: 1920
Subnet: 255.255.255.0
Gateway: 192.168.1.1

Operation Mode: Mixed

Make sure USE DNS is checked!!!

DNS SERVER IP: 208.67.222.222
Domain Name: http://WWW.SVFTAIKS.COM

Now click on Setting, if it gives you an error after clicking, click setting again until it takes. Once it does, close the WIZ program and follow on to next step.

5. Now that you can see the iHub current info and the settings, now what you want to do is check on the back of your router, this part is crucial... Make absolute certain that your PC is plugged in to the first outgoing port on the router. And now unplug iHub from back of computer, plug it in to the 2nd outgoing port on the router (the ip that the router assigns to this port should be 192.168.1.101 by default.)

6. Open up WIZ program again, and click on Search until it finds your iHub, notice that the settings should read what I typed above? If it does then continue on, if not, then go back and retry until it does!! So now that it says the settings that we want it too, we still see the v82.0 right? Lets get rid of that now.

7. Go to Start>Run>CMD>ipconfig

Now type: ping 192.168.1.101 (if you get a series of replies, we will be able to load 1.4 with no problems at all!) Thats right, you can click thanks!!

8. Now bring the WIZ program back up, and I want you to click on Upload tab, you should be able to at this point, make sure you have extracted the 1.4 bin to your desktop. and then choose that file. You should instantly notice it start uploading with little bars with pretty much no hanging at all.

9. Once it says Completed, close WIZ, then reopen it, notice a new version?

10. Thats it, that should be the solid fix that everyone has been looking for, and no need to use rom 1, its a waste of time when you can just do it this way with 0% problems.

Additional steps to load bin 209 (for elite users only). You should see ******* device connect! after rebooting receiver with iHub plugged in.

Then just put bin 209 on USB stick, upload, reboot, and you should be good to setup all your settings as before - Also, you will now be able to see your IP Config menu again and able to change settings at will.

New information about nfusion c/p

Fri, 15 Jan 2010 12:40:26 +0000

--------------------------------------------------------------------------------

This is copy and post from another site

#1. The EKS Team that supports the Neosat IPRO2K is currently Beta Testing NEOSAT 1000 Support. For all of you who know your FTA, you know that what works on a Neosat 1000 also works on a Nova, Solaris and Phoenix. Its being tested, and its working, but its EKS. Once Beta testing is complete it will be available on a paid basis just like EKS for the IPro 2K.

#2. The Nfusion Team who have been providing for SUNS has dissappeared from the picture. The folks at the EKS team are in no way affiliated with them.

#3. bbb23 is claiming to be Doc. T and his claims are being disputed and challenged by others. This is not new. His posts under the handle of bbb23 DocT and others have been very controversial to say the least. However, throughout the community there have been reports that SUNS connected messages are being displayed and bbb23 is claiming to be behind that activity. He claims to be of the Old original SUNS team that had splitt off from the SUNS team that may have involved the SuperStar character and those at the ##### site. He claims to be working now with those who had long ago left Nfusion to revive SUNS as SUNS3.

So what does this all mean for you the end user?

Right now it doesn't mean much of anything other than the fact that there are now 3 groups who have been taking action in regards to the Nfusion situation. This should be considered by at least some of you a positive sign of hope that something is being done rather than nothing. Will it all work out in the end? Only time will tell.

Again to make this perfectly clear, the original SUNS team is not converting to a paid solution BUT a paid solution will very likely soon be available in the form of EKS.

Testing is underway by other groups that have been having some effect on the current SUNS system, verified to be showing SUNS connected on boxes running special files, for instance the Tronics mod file from a few months back. It was also seen by one of moderators for about 40 minutes last week, where channels were up on the Solaris between 105 and 200.

In addition to all of this, several Private Card Sharing systems are doing increased testing on the Nfusion units.

Nfusion activity right now is high from many parts of the community. But nothing right now is available for wide scale public testing. Our hope is that these paths lead to good things in the near future, but nothing in this hobby is ever guaranteed. I invite alll of you not in the trenches to sit back and watch the show to see what unfolds.
I do no test or condone there use to any illegall activity.
All posts are only for informational and educational purpose only.

Interesting Information

Sun, 10 Jan 2010 22:26:41 +0000

LIFE IN THE 1500'S

The next time you are washing your hands and complain because the water temperature isn't just how you like it, think about how things used to be. Here are some facts about the1500s:

Most people got married in June because they took their yearly bath in May, and still smelled pretty good by June. However, they were starting to smell, so brides carried a bouquet of flowers to hide the body odor. Hence the custom today of carrying a bouquet when getting married.

Baths consisted of a big tub filled with hot water. The man of the house had the privilege of the nice clean water, then all the other sons and men, then the women and finally the children. Last of all the babies. By then the water was so dirty you could actually lose someone in it. Hence the saying, Don't throw the baby out with the Bath water..

Houses had thatched roofs-thick straw-piled high, with no wood underneath. It was the only place for animals to get warm, so all the cats and other small animals (mice, bugs) lived in the roof When it rained it became slippery and sometimes the animals would slip and fall off the roof. Hence the saying . It's raining cats and dogs.

There was nothing to stop things from falling into the house.. This posed a real problem in the bedroom where bugs and other droppings could mess up your nice clean bed. Hence, a bed with big posts and a sheet hung over the top afforded some protection. That's how canopy beds came into existence.

The floor was dirt. Only the wealthy had something other than dirt. Hence the saying, Dirt poor. The wealthy had slate floors that would get slippery in the winter when wet, so they spread thresh (straw) on floor to help keep their footing. As the winter wore on, they added more thresh until, when you opened the door, it would all start slipping outside. A piece of wood was placed in the entranceway. Hence the saying a thresh hold.

(Getting quite an education, aren't you?)

In those old days, they cooked in the kitchen with a big kettle that always hung over the fire. Every day they lit the fire and added things to the pot. They ate mostly vegetables and did not get much meat. They would eat the stew for dinner, leaving leftovers in the pot to get cold overnight and then start over the next day. Sometimes stew had food in it that had been there for quite a while. Hence the rhyme, Peas porridge hot, peas porridge cold, peas porridge in the pot nine days old..

Sometimes they could obtain pork, which made them feel quite special. When visitors came over, they would hang up their bacon to show off. It was a sign of wealth that a man could, bring home the bacon. They would cut off a little to share with guests and would all sit around and chew the fat..

Those with money had plates made of pewter. Food with high acid content caused some of the lead to leach onto the food, causing lead poisoning death. This happened most often with tomatoes, so for the next 400 years or so, tomatoes were considered poisonous.

Bread was divided according to status. Workers got the burnt bottom of the loaf, the family got the middle, and guests got the top, or the upper crust.

Lead cups were used to drink ale or whiskey. The combination would sometimes knock the imbibers out for a couple of days. Someone walking along the road would take them for dead and prepare them for burial. They were laid out on the kitchen table for a couple of days and the family would gather around and eat and drink and wait and see if they would wake up. Hence the custom of holding a wake.

England is old and small and the local folks started running out of places to bury people. So they would dig up coffins and would take the bones to a bone-house, and reuse the grave. When reopening these coffins, 1 out of 25 coffins were found to have scratch marks on the inside and they realized they had been burying people alive. So they would tie a string on the wrist of the corpse, lead it through the coffin and up through the ground and tie it to a bell. Someone would have to sit out in the graveyard all night (the graveyard shift.) to listen for the bell; thus, someone could be, saved by the bell or was considered a ...dead ringer..

And that's the truth...Now, whoever said History was boring ! ! !

Educate someone. Share these facts with a friend